tvb

首页 / 服务与支持 / 打托信息

打托信息

IF Gap between pallets or between pallet and container wall is >5cm, must use some filling or fixing material to fix pallets, to avoiding pallets moving inside container during transportation. ----如果“木托与木托之间隙”的间(即木托与货柜内壁靠紧)或者“木托与货柜内壁之间”的间隙(即木托与木托靠紧)》5cm,则必须加填充物或固定木板等方法,使木拖在运输途中不会在货柜里面移动。而导致木托倾斜或倒柜现象出现。方法如下:

  • Pallets lean against sech other,Gap between pallet and container Wall >5cm,use strong wooden board to fixed on “minimum2” supporting legs on same pallet.(one end of board is against container wall) ----木托紧靠,木托与货柜的间隙>5cm,用坚硬的木板通过铁钉在同一个木托的支撑木墩上(至少2个墩),木板一端靠着货柜内壁,上下层木托都要钉。
  • Gap between pallet and pallet>5cm, ues strong wooden board to fixed on 1 supporting leg of 2 different pallets ----木托靠货柜内壁,木托与木托的间隙>5cm,用坚硬的木板通过铁钉把木板钉在木托支撑木墩上(2个木托各钉一个墩),上下层木托都要钉。

  • Another method: use wooden-frame to fill Gap, frame height should be 1.5 times pallet (with product) height.----另一种方法:用木架填充间隙,木架高度为打托后总高度的1.5倍。
  • Workers are waiting for fixing pallets during loading----装柜中,工人正在等待用木板固定木托。

  • Fixing pallets by nailing wooden board. ----通过钉木板固定木托。
  • Fixing pallets by nailing wooden board. ----通过钉木板固定木托,没靠紧货柜内壁的木托要尽量靠紧。

  • Fixing pallets by nailing wooden board. ----通过钉木板固定木托。
  • Fixing pallets by nailing wooden board. ----通过钉木板固定木托。

  • Fixing pallets by nailing wooden board. ----通过钉木板固定木托,木托顶住货柜内壁。
  • Pallet lean against container wall. ----木托紧靠货柜内壁。

  • No need board to fix pallets due to small gap----由于间隙小,不需要加木板条固定。
  • No need board to fix pallets due to small gap----由于间隙小,不需要加木板条固定。

  • Inclined pallet during transportation,major reason is “Big Gap” and pallets are not fixed by wooden board. ----倾斜的木托,主要原因是间隙大造成,木托没有被固定,造成的结果是:客人拒绝卸柜,存在安全因素。
  • Inclined pallet during transportation,major reason is “Big Gap” and pallets are not fixed by wooden board. ----倾斜的木托,主要原因是间隙大造成,木托没有被固定,造成的结果是:客人拒绝卸柜,存在安全因素。

Fixing pallets at container tail — Using “crossed” strong wire (“not” allowed metal strap or p;astic straps) to fix pallets at container tail, to prevent pa;;ets from falling down when opening container door, if pallets collapse during transportation. ----在货柜的尾部,用高强度的铁丝(不能用铁皮带或塑钢带),通过货柜顶部和底部2侧的铁勾,交叉拉住木托,防止在开门时,可能倒柜的木托从货柜上掉下,造成危险事故。

  • Crossed strong metal wire at container tall.
  • Hooks on top and bottom of container.

  • 交叉Crossed strong metal wire at container tall.
  • Crossed strong metal wire at container tall.

  • Matal straps and pastic straps are “NOT” allowed, specially using straps with joint. ----“不能”用铁皮带和塑钢带,特别是有接口的。
  • Using wooden-frame at tall is NOT preferred. ----使用木架不是首选方法,而且成本高,尺寸很难提前计算,须临时制作,不方便。

  • Pallet with products falling down from container. It is very dangerous. ----倒柜,整托产品从柜尾倒出掉落,非常危险。
  • Pallet with products falling down from container. It is very dangerous. ----倒柜,整托产品从柜尾倒出掉落,非常危险。

  • Dangerous !!! But if using wire to fix pallets at tail, at least pallets will not fall down when opening door. ----危险!!!但如果用铁丝固定木托,至少在开门时,木托不会掉出来。
  • Dangerous !!! But if using wire to fix pallets at tail, at least pallets will not fall down when opening door. ----危险!!!但如果用铁丝固定木托,至少在开门时,木托不会掉出来。